<<Back

Over time, your heating system will develop sludge and corrosion formed from the hot water travelling through your system. The sludge and corrosion is being created from day one of your heating system being installed.

Unfortunately, the sludge and corrosion builds up in the pipes which drastically effects the way your heating system performs.

The answer isn't always to spend thousands of pounds on a new heating system. A technique called Power Flushing can be used to flush out the sludge from your system, restoring it to full working order.


What is Power Flushing?
Power flushing is the fastest and most effective way to flush heating systems, and involves minimal disruption and dismantling.

Power Flushing uses a modern chemical cleansing fluid which forcibly cleanses your heating system using water at high velocity, but low pressure.


What Symptoms should i look out for?
If you heating system suffers from any of the following symptoms, there is a good chance that your heating system will benefit from Power Flushing.

* Noisy Boiler
* Heating Circulation Problems
* Radiators that frequently need venting or bleeding
* Cold spots on your radiators
* Pump Failure
* Overall heating system is slow to start up
* Leaking radiator valves
* Reduced heating output

How does Power Flushing work?
The Power Flushing pump is simply
connected into the heating system, either across standard circulator pump couplings, across the tails of one radiator, or wherever most practicable. The powerful flow, combined with instantaneous flow reverser device, will dislodge and mobilise deposits and corrosion which resist traditional system cleaning methods.

Once the corrosion and sludge deposits have been loosened and mobilised, fresh clean
water is forced through the heating system, pushing the contaminated water out through a full bore dump valve to waste. During the process, radiators are individually flushed, without removing or disconnecting them from the system, by directing the full output of the pump through each radiator separately.

At the end of the flushing process, the system contains fresh clean water and reinstatement of the system to normal operation takes only a few minutes.


Think you could benefit from Power Flushing?
If you think your heating system might benefit from Power Flushing please Contact Us now for a quotation.

<<Back